Business License
Contact Us
Your inquiry content must be between 10 to 5000 characters
Please enter Your valid email address
Smoke Alarm Production Test Tunnel
Equipment Function：
The smoke alarm production test tunnel is used for batch test or calibration smoke alarm and detector in production process. The main parts, aerosol generator and obscuration meter are fully same as standards smoke tunnel to ensure high reliable test result. The aerosol concentration in the smoke box is controlled by fine-tuned PID to maintain constant OBS of smoke in a narrow range of +/-0.004dB/m. The smoke alarm production test tunnel is installed on production assembly line. The alarms are placed on the conveyor belt and flow into the smoke box. After passing through the smoke box, check the status of the alarm. You can batch quickly test the smoke alarm or calibrate the sensitivity. The specially developed zomtest smoke test tunnel software carries out constant smoke control and continuous monitoring of smoke concentration. The speed of the conveyor belt shall be adjusted according to the response time of the sensor to improve the production efficiency.
Specification ：
1) Model：ZNAL-7
2) Power：220V AC 1kW
3) Aerosol generator：Liquid paraffin , particle size distribution between 0.5µm~1.0µm，
4) Optical smoke densitometer: transmitted light, wavelength 880nm~950nm, range: 0~2 dB/m,
5) Tunnel size: L1.4m x W0.49m x H0.7m. Customized width according to customer’s conveyor belt
6) Wind speed: 0.2 to 0.8 m/s
Smoke range:0.05 to 0.8 dB/m, set value±0.004dB/m
Recently Posted
-
Smoke Detector Test Tunnel
October 24, 2026Equipment Function： The smoke heat detector test tunnel was designed for sensitivity test of Smok
Read More -
Smoke Alarm Production Test Tunnel
October 24, 2026Equipment Function： The smoke alarm production test tunnel was designed for batch test or calibra
Read More -
UL217/ 268 Smoke box
October 24, 2026Equipment Function： The equipment is intended for smoke alarm or smoke detectors sampling test. The smo
Read More -
Ionization Smoke Detector and Photoelectric Smoke Detector
October 24, 2026The two most common types of smoke detection technology are ionization smoke detectors and photoelectric smoke detectors. • I
Read More
Contact Us
Recommended Products
-
Spring Door Hinge Durability Test MachineUS$ 10000 - 100000MOQ: 1 Combo -
BHMA Electrified Deadlock Cycles Test MachineUS$ 10000 - 100000MOQ: 1 Combo
-
Electronic Lock Durability Test MachineUS$ 10000 - 100000MOQ: 1 Combo
-
Special Paraffin Oil for Smoke GeneratorUS$ 50 - 100MOQ: 1 Barrel
-
Smoke Detector Portable Test ChamberUS$ 10000MOQ: 1 Combo
-
Heat Alarm & Detector Test TunnelNegotiableMOQ: 1 Combo
-
Mortices Lock Resistance to Drilling Test MachineUS$ 10000 - 100000MOQ: 1 Combo
-
BHMA Exit Device Cycle Test MachineUS$ 10000 - 100000MOQ: 1 Combo
-
Multiple Stations Sliding Door Test MachineUS$ 10000 - 100000MOQ: 1 Combo
-
EN Door Handle Durability Test MachineNegotiableMOQ: 1 Piece
-
UL Standard Smoke Detector Dust Test ChamberUS$ 10000MOQ: 1 Combo
-
BHM Aelectrified Lock Slamtest MachineUS$ 10000 - 100000MOQ: 1 Combo
-
Lock Tester for TemperatureUS$ 10000 - 100000MOQ: 1 Combo
-
Lock Tester for TemperatureUS$ 10000 - 100000MOQ: 1 Combo
-
Door Handle Tension Strength Test MachineNegotiableMOQ: 1 Piece
